Converting 000 lux to lumens results in 0 lumens. This is because when the illuminance (lux) is zero, the total luminous flux (lumens) over any given area will also be zero.
Lux measures illuminance on a surface area, while lumens measure the total amount of visible light emitted. Since lux equals lumens per square meter, zero lux means no light reaching that area, hence zero lumens.
Conversion Tool
Result in lumens:
Conversion Formula
The formula to convert lux to lumens is:
Lumens = Lux × Area (in square meters)
Lux measures the light intensity per unit area, so multiplying lux by the surface area gives total luminous flux in lumens. Without knowing the area, lux alone can’t be directly converted to lumens.
Example:
If you have 500 lux illuminating a surface of 2 m², the lumens would be:
- Calculate lumens = 500 lux × 2 m²
- Lumens = 1000 lm
Conversion Example
- Example 1: Convert 50 lux on 1 m²
– Lumens = 50 × 1 = 50 lm
– The surface receives 50 lumens. - Example 2: Convert 120 lux on 3 m²
– Lumens = 120 × 3 = 360 lm
– Total light over 3 square meters is 360 lumens. - Example 3: Convert 0 lux on 5 m²
– Lumens = 0 × 5 = 0 lm
– No light is reaching the surface. - Example 4: Convert 200 lux on 0.5 m²
– Lumens = 200 × 0.5 = 100 lm
– Half square meter illuminated yields 100 lumens.
Conversion Chart
| Lux | Lumens (Area = 1 m²) |
|---|---|
| -25.0 | -25.0000 |
| -20.0 | -20.0000 |
| -15.0 | -15.0000 |
| -10.0 | -10.0000 |
| -5.0 | -5.0000 |
| 0.0 | 0.0000 |
| 5.0 | 5.0000 |
| 10.0 | 10.0000 |
| 15.0 | 15.0000 |
| 20.0 | 20.0000 |
| 25.0 | 25.0000 |
The chart shows lux values and the corresponding lumens assuming a 1 square meter area. To get lumens for different areas, multiply the lumen values by the area in square meters.
Related Conversion Questions
- How do I convert 000 lux to lumens if the surface area is unknown?
- What is the lumen output for 000 lux on a 2 square meter surface?
- Can lux be converted directly to lumens without knowing area for 000 lux?
- What’s the difference between lumens and lux at 000 lux reading?
- How to calculate lumens from 000 lux for lighting design?
- Is 000 lux equal to zero lumens always?
- How does changing the surface area affect lumens from 000 lux?
Conversion Definitions
Lux: Lux is the unit measuring illuminance, or how much luminous flux hits a surface per square meter. It tells how brightly a surface is lit, calculated as lumens per square meter, and used to quantify light intensity as perceived by the human eye.
Lumens: Lumens are the unit of luminous flux that measures the total amount of visible light emitted by a source. It represents the perceived power of light, independent of area, and shows how bright a light source appears to the human eye.
Conversion FAQs
Why can’t I convert lux directly to lumens without area?
Lux measures light intensity on a surface, so it depends on area to find total light output. Without area, the total luminous flux in lumens can’t be determined because lumens accounts for overall light emission, not per unit area.
What happens if I use a negative lux value in conversion?
Negative lux values are physically meaningless because illuminance cannot be less than zero. Using negative lux results in negative lumens, which doesn’t correspond to real light conditions and should be avoided.
Is the conversion formula different for non-flat surfaces?
Yes, for curved or irregular surfaces, the area calculation changes because lux is measured perpendicular to the surface. The effective area must be adjusted considering angles, otherwise the conversion will be inaccurate.
Can lumens be used to calculate energy consumption from lux?
Lumens measure light output, not energy. To estimate energy use, you need wattage and efficiency of the light source. Lux helps in designing lighting but doesn’t directly indicate power consumption.
I’ve put so much effort writing this blog post to provide value to you. It’ll be very helpful for me, if you consider sharing it on social media or with your friends/family. SHARING IS ♥️
