The electronic devices that can store electrical charge in them are called capacitors. Also, they can omit the passage of an AC flowing through them. The structure of a condensador consists of at least two conducting plates with a layer of dielectric material in between them.
Capacitor vs Condenser
The difference between Capacitor and Condenser is that in comparison with the word condenser, capacitor is a relatively newer term. There is no difference in the working mechanism or the structure, it’s just that condenser is an older term used for capacitor.
When a voltage is applied between two wires, a potential difference is created which generates a static campo eléctrico which is separated by the dielectric in positive and negative charges. The negative charges get stored at the negative pole of the capacitor and the positive charges at the positive pole.
The term capacitor came into use from the year 1926. Before that, the term condenser was used in its place. Capacitor has only one definition in all fields of study while a condenser can mean different instruments in other fields of study.
Comparison Table Between Capacitor and Condenser
|Parámetros de comparación||Condensador||Condenser|
|Term||Capacitor is a newer term used in place of condenser.||Condenser is an old term used for capacitor.|
|Year||The term capacitor fully replaced the term condenser in the year 1926.||The term condenser was stopped from using from the year 1926.|
|Definition in other fields of study||The working, structure and definition stays the same in all fields of study of a capacitor.||Condenser has different workings, structure in different fields of study. It can also be a whole different device in some studies.|
|Energy conversion||The energy stored in the capacitor turns into an electric field between the plates of the capacitor.||The energy stored in a condenser gets turned into an electrostatic field between the poles of the condenser.|
|Usos||Capacitors are used for signal coupling, motor starting, decoupling, filtering, in memory applications, etc.||Condensers are used to convert gas into fluid by removing the heat present in the system and also as an optical instrument that focuses the light beam at one point.|
¿Qué es el condensador?
A capacitor can be described as a system of two or more conducting bodies which have a layer of dielectric between them that has an ability to accumulate electricity. The capacitance of a capacitor depends on the dielectric present between the conducting plates.
Also, the capacitance increases with the increase in the área de superficie of the plates and decreases with the distance between them. To obtain a higher capacitance, the capacitors can be grouped.
When grouped in parallel, the capacitance of the whole system increases. When grouped in series, the capacitance of the whole system decreases. Capacitors are mainly divided into electrolytic, electrostatic and electrochemical depending on the method of manufacturing.
What is Condenser?
Condenser is an older term used for capacitor. To be precise, the term was stopped from using from the year 1926 when the term capacitor was more commonly used. From an electrical perspective, both capacitors and condensers are the same devices. There is no difference in their definition, working or in their structure.
But when seen in other fields of study, the term condenser may be used to describe other different devices. For example, if looked upon from an optical perspective, the condenser can be described as an optical system that helps in focusing the rays of light from a light source into a more focused and narrower beam.
When looked upon from a mechanical perspective, it can be described as a device used to condense gas into liquid by decreasing the heat present in the system.
Principales diferencias entre Capacitor and Condenser
- Capacitor is a newer term while condenser is an old term. It is used in place of the term condenser for a long time.
- Capacitor was scientifically put in place of the term condenser in the year 1926. After that, the term condenser was rarely used.
- The energy stored in the capacitor is turned into an electric field that flows between the plates of the capacitor whereas the energy stored in a condenser is turned into an electrostatic field which flows between the poles of the condenser.
- The structure, working mechanism and definition of a capacitor never changes in any field of study while the working mechanism and structure of a condenser is different in other fields of study. Sometimes, the condenser can also be a whole different device.
- Examples of the use of capacitors are signal coupling, decoupling, motor starting, filtering, in computer memory applications, etc whereas examples of the use of condensers are as an optical instrument which focuses the light beam at one point and also as a device used to convert gas into fluid by removing the heat present in the system.
Both capacitor and condenser are terms used for the same device in the electrical field of study. Condenser is an older term which was replaced by a newer term, i.e., capacitor in the year 1926. After that, the term condenser was rarely used to describe a capacitor. Capacitors are electric devices that store charges and energy in them. Also, they can be used to omit the passage of an alternating current flowing through them.
The difference of a size or shape in between different capacitors can influence their capacitance. One difference that can be found between Capacitor and Condenser is that a condenser converts the energy it stored between it’s poles into an electrostatic field.
On the other hand, a conductor converts the energy it stored between the conducting plates into an electric field. Also, condensers in the field of optics is described as a device that helps the observer to focus the light beam at a point. The definition, structure and working of a capacitor stays the same no matter in what field of study it is used in. Capacitor is mainly used for signal coupling, decoupling, filtering and in the process to start a motor.
Tabla de contenido