Diferencia entre conducción, convección y radiación (con tabla)

Conduction vs Convection vs Radiation

When thermal energy is transferred from one system to another through the dispersal of heat, the phenomenon is called a heat transfer.

This can be done in three ways – conduction, convection, and radiation.

los key difference between conduction, convection, and radiation lies in the fact that its only a matter of how heat is transferred from a zone with higher kinetic energy to a zone of lower kinetic energy.

In conduction, this happens through direct physical contact between two objects.

Convection, on the other hand, occurs when the heat is transferred through the movement of molecules.

It refers to heat transfer that occurs in fluids. Radiation does not require physical contact between two objects like the other methods.

It is the process by which heat is transferred through electromagnetic waves


Comparison Table Between Conduction, Convection, and Radiation (in Tabular Form)

Parámetro de comparaciónConductionConvectionRadiation
DefiniciónProcess of heat transfer between objects through direct physical contact.Process of heat transfer through a fluid medium such as liquids or gas.Process of heat transfer through electromagnetic waves.
MétodoHeat is transferred due to molecular collision when solids come into contact with each other.Heat is transferred by the flow of the fluids.Heat is transferred through the radiation emitted by bodies without the need for a medium.
CauseHeat travelling from a high temperature area to a low temperature area.Heat travelling from a low density area to a high density area.Energy emitted by bodies through the rotational and vibrational movements of atoms and molecules.
MediumHeated solids.Intervening substance like fluids.Electromagnetic waves.


What is Conduction?

The process of heat transfer through direct contact between two objects is called conduction.

When the molecules of one object absorb heat energy they start moving quickly and while doing so, they come into contact with neighboring objects and an energy transfer occurs.

Conduction is a very common process. The simple act of touching a hot vessel causes conduction to occur and heat is transferred from the vessel to your hand.

For conduction to happen, some factors must be kept in mind.

The first is the temperature gradient which is the description of the direction in which the heat is flowing and the rate of transfer.

The process of conduction from a hot source to a cold source (or a source lacking in heat energy) continues until both bodies reach a state of thermal equilibrium.

Another important factor is the size of the objects involved. Larger objects require more heat to be warmed up but at the same time, they lose heat faster.

This is because the bigger their surface area is, the more they come into contact with the open air.

los propiedades físicas of the objects must also be taken into account.

If you use a wooden spoon while cooking, you’ll notice that the spoon does not become hot. This is because wood is a bad conductor.

However, if you were to use a metal spoon heat will be transferred to it very quickly because the metal is a good conductor.

Poor conductors are also called insulators.

They prevent energy from flowing away from the source.

Por ejemplo, polar bears are able to survive in arctic regions because their fur serves as an insulator which traps heat inside the body.

Example of Heat Conduction
Example of Heat Conduction

What is Convection?

When the mass motion of a fluid due to the heated fluid moving away from the source heat occurs, it carries energy with it.

This is also a form of heat transfer and it is called convection.

This process happens because heat decreases the density of fluids like air and water.

The loss of density causes the fluid to rise thereby creating convection currents that can transfer energy.

As the heated layers of the fluid rise, the colder layers which still retain their density descend towards the heat source until they become heated and begin to rise.

There are two kinds of convection – spontaneous and forced. In the former, convection occurs naturally due to buoyancy.

The difference in temperature causes a difference in densities.

For example, when heat from the sun warms up the earth, the sea absorbs most of the energy but it takes more time to become warm as opposed to land.

Therefore the air above the land loses density faster leading to the creation of a low-pressure area over coastal areas.

But the area over the sea has higher pressure and this makes air move from the higher pressure area to the lower pressure area i.e, from sea to land.

This is why the breeze near the sea is generally stronger.

Forced convection is caused using an external source like a fan or a geyser.

It is related to Newton’s law of cooling the equation for which is as follows:

P =  dQ/dt = hA(T-T)

Here P = dQ/dt is the rate of transfer of heat. The h is the convection heat-transfer coefficient. A is the surface area of the material which is exposed.

T refers to the temperature of the object in the fluid and T refers to the temperature of the fluid made to undergo the process of convection.

Convection Examples


What is Radiation?

Unlike conduction and convection which both require actual physical contact between two bodies, radiation is the heat transfer that occurs even when the bodies don’t come into contact or are separated in space.

Everything in the universe is made up of atoms which together form molecules.

RECOMENDADO  Diferencia entre tálamo e hipotálamo (con tabla)

The rotation and vibration of atoms and molecules ensure that all substances continue to emit energy through electromagnetic radiation.

Electrons with high energy at high atomic levels descend to levels where the energy is lower.

Whatever energy is lost along the way is emitted as electromagnetic radiation.

When energy is absorbed by an atom, its electrons climb to higher energy levels.

Therefore when the rate at which energy is absorbed is balanced by the rate at which it is emitted, the temperature of the substance will not change.

If the former is greater than the latter, the temperature will rise and if it is lower, the temperature will also decrease.

A common example of heat transfer through radiation is the sun. It does not come into contact with any of the other planets nor is there a physical medium for heat transfer.

Yet we are able to feel its warmth because of the electromagnetic radiation it emits which allows its rays to reach the earth.

Example of Radiation
Example of Radiation

Main Differences Between Conduction, Convection, and Radiation

  1. Conduction is the process by which heat is transferred between two objects through direct physical contact.
  2. In convection heat is transferred by a fluid medium such as a liquid or a gas.
  3. The transition of heat through electromagnetic waves is called radiation.
  4. Heat traveling from an area with a high temperature to an area with low temperature is the cause of conduction.
  5. Heat moving from an area with low density to an area with high density causes convection.
  6. Radiation occurs because the rotational and vibration movements of the atoms and molecules which make up bodies causes energy to be transmitted constantly.


Frequently Asked Questions (FAQ) About Conduction, Convection, and Radiation

  1. What are some examples of radiation conduction and convection?

    Some examples of convection are the boiling of water, the melting of ice, the mechanism of the radiator, a steaming cup of hot tea, etc.

    Examples of conduction are the use of the heating pad to warm the body, the engine getting hot due to moving parts, the roasting of food over a campfire, etc. Examples of radiation include burning of candle emitting radiation, sun emitting radiation.

  2. Is rubbing your hands together conduction?

    Conduction is a phenomenon where the heat is transferred from one part to another. But in the case of rubbing of hands, the heat is generated due to the process of friction, rather than conduction.

    When both the palms are rubbed together friction is created which results in the generation of heat.

  3. How does heat travel by conduction?

    Let us take an example of a 4 feet long steel rod. When we start heating the rod from one end using fire, it can be seen that the heat starts traveling through the rod and after some time, the entire rod gets hot.

    This is because the material with which the rod is made has the capability of heat transfer and is a conducting material.

  4. Is an iron an example of conduction?

    Yes, iron is an example of conduction. When you start heating one end of an iron rod or piece, it can be seen that the heat starts traveling through the rod and after some time, the entire rod gets hot.

    This is because the material with which the rod is made has the capability of heat transfer and is a conducting material.

  5. Why is convection faster than conduction?

    Convection is faster than the process of conduction.

    This is because, in the case of convection, which mostly happens in fluids, the molecules have the liberty to move and vibrate from their places at a faster rate, while in conduction, the molecules do not have much space to move and vibrate.

  6. Is conduction more efficient than convection?

    No, conduction is not efficient than convection. This is because, in the case of convection, which mostly happens in fluids, the molecules have the liberty to move and vibrate from their places at a faster rate, while in conduction, the molecules do not have much space to move and vibrate.

  7. How can we prevent convection?

    The insulating material has been widely used all around the globe to reduce the effect of conduction as these materials do not conduct any heat or electricity through them and do not result in heat or energy loss.

    These materials further prevent the circulation of air through them, thus resulting in preventing convection also.



Conduction, convection, and radiation are important concepts in the study of thermodynamics.

Simply put, heat traveling from a hot object or a hot area to a cold object of the area is conduction.

Heat is transferred through the movement of fluid currents is convection and heat transferred through electromagnetic waves without any medium is radiation.


Word Cloud for Difference Between Conduction, Convection, and Radiation

La siguiente es una recopilación de los términos más utilizados en este artículo sobre Conduction, Convection, and Radiation. Esto debería ayudarlo a recordar términos relacionados tal como se usan en este artículo en una etapa posterior.

Difference Between Conduction Convection and Radiation
Nube de palabras para Conduction, Convection, and Radiation



  1. https://www.sciencedirect.com/science/article/pii/0142727X94000144
  2. https://asmedigitalcollection.asme.org/heattransfer/article-abstract/85/4/318/414710