AT&T Router Login Procedure

To log into your AT&T router, follow these simple steps:
- Connect your device to the routerโs network: Ensure your computer or smartphone is connected to the AT&T routerโs Wi-Fi network or plugged into one of its Ethernet ports.
- Open a web browser and navigate to the routerโs login page: Type 192.168.1.254 into your browserโs address bar and press Enter. This should take you to the routerโs login page.
- Enter your admin login details: Look for any information labeled โadmin loginโ or similar on your router. It is often printed on a sticker on the bottom or side of the device. If you canโt find these details, consult the routerโs user manual or search online for the default login for your routerโs make and model.
- Log in to your routerโs web interface: Enter the admin login credentials into the appropriate fields on the login page. Then, click the โLoginโ or โSign Inโ button to access the routerโs web interface.
Once successfully logged in, you can explore the various settings and options available to customize your home network. Be sure to save any changes you make and log out of the routerโs web interface when you are finished to ensure the security of your network.
Troubleshooting AT&T Router Login Issues

Password Reset Process
If youโve forgotten your AT&T router password, follow these steps to reset it:
- Locate the reset button on your router. Itโs a small hole or button at the back.
- Press and hold the reset button using a paperclip or pin for at least 10 seconds.
- Release the button and wait for your router to reboot. The default settings will be restored, including the default password.
- Connect to your routerโs network, open your browser, and go to 192.168.1.254 or click here.
- Log in using the default password, found on the routerโs label or user manual.
- Change your password and customize your router settings as needed.
Remember to keep your new password secure and easy to remember.
Dealing With Connectivity Issues
If youโre experiencing connectivity problems while trying to log into your AT&T router, try the following steps:
- Restart your devices: Unplug the power cord from your router, modem, or Wi-Fi gateway. Wait for 30 seconds, then plug it back in. Also, restart your computer or device before trying to connect again.
- Check physical connections: Ensure all cables are securely connected to your router and modem, especially the Ethernet connections.
- Verify your Wi-Fi connection: Ensure youโre connected to the correct Wi-Fi network and the Wi-Fi signal is strong enough.
- Disable VPNs or proxies: Some VPNs or proxy servers can interfere with your connection to the router. Disable them temporarily to see if that resolves the issue.
- Reset network settings: If the problem persists, consider resetting your network settings to default on your device.
After trying these steps, you can log into your AT&T router successfully. Always ensure your router and devices are up-to-date, and maintain a stable internet connection for seamless use.
Advanced Router Settings

This section will cover advanced router settings, including Changing Network Name, Setting Up Guest Wi-Fi, and Factory Reset AT&T Router.
Changing Network Name
To change the network name of your AT&T router, follow these steps:
- Ensure you connect to your AT&T routerโs network using Wi-Fi or Ethernet.
- Open a web browser on your device.
- In the address bar, type in
http://192.168.1.254
and press Enter. - Enter your login credentials to sign in to the routerโs control panel.
- Locate the Wi-Fi settings section.
- You will find the Wi-Fi network name (SSID) field; change it to your desired name.
- Save the changes by clicking on โApplyโ or โSave.โ
Setting Up Guest Wi-Fi
To set up a guest Wi-Fi network on your AT&T router, perform the following steps:
- Connect to your AT&T routerโs network using Wi-Fi or Ethernet.
- Open a web browser on your device.
- In the address bar, type in
http://192.168.1.254
, and press Enter. - Enter your login credentials to sign in to the routerโs control panel.
- Locate the Guest Wi-Fi settings section.
- Enable guest Wi-Fi by toggling the switch to โOn.โ
- Set a network name (SSID) and password for your guestโs Wi-Fi network.
- Save the changes by clicking on โApplyโ or โSave.โ
Factory Reset AT&T Router
If you need to reset your AT&T router to its factory settings, follow the steps below:
- Locate the reset button on the back or bottom of your router. It might be labeled as Reset or Factory Reset.
- Press a small object like a paperclip or pen and hold the reset button for approximately 10-15 seconds.
- Release the button when the routerโs lights start flashing, or the power light turns red.
- Wait for the router to reboot. This process can take a few minutes.
- The reset is complete once the routerโs power light turns green or steady.
Sandeep Bhandari holds a Bachelor of Engineering in Computers from Thapar University (2006). He has 20 years of experience in the technology field. He has a keen interest in various technical fields, including database systems, computer networks, and programming. You can read more about him on his bio page.