Bosch is one of the leading machinery producers with a long working life. The Bosch GSB and GSR are no exception to this fact.
Key Takeaways
- Bosch GSB 18V and Bosch GSR 12V are cordless drill drivers, but they vary in power and torque.
- Bosch GSB 18V has a higher voltage and more torque than Bosch GSR 12V, making it suitable for heavier drilling tasks and tougher materials.
- Bosch GSR 12V is smaller and more compact, making it easier to handle and suitable for smaller drilling tasks and tighter spaces.
Bosch GSB 18V vs Bosch GSR 12V
The difference between the Bosch GSB and Bosch GSR is that GSB contains a chuck of a diameter of 13 mm. The GSR possesses a chuck of 10 mm diameter.
Comparison Table
Parameters of Comparison | Bosch GSB | Bosch GSR |
---|---|---|
Price | The price of the GSB is relatively high. | The Bosch GSR belongs to a lower range of drills. It is good for those on a budget. |
Motor | The Bosch GSB contains a special Brushless motor. It does not allow it to heat up as there is less friction. | Bosch GSR does not contain this motor. Therefore, the drill heats up after a short time of use. |
Weight | The weight of the Bosch GSB is approximately three kilograms. | The Bosch GSR weighs 2.28 kilograms. It is because it does not contain a stand like the GSB. |
Works on | The GSB is a heavy-duty drill and can work on wood, steel, and masonry. | Bosch claims it can work on masonry, but the customer reviews say differently. |
Voltage | The voltage that the GSB offers is 18 volts. | GSR offers a voltage of 12 volts. |
What is Bosch GSB 180-LI 18V?
This cordless drill is known to be a more heavy-duty option. It can handle more surfaces than other cordless drills.
- Screwdriver
- Drilling
- Diving
The chuck is adjustable, and therefore, there is no need for a chuck key.
The motor consists of a special brushless motor for the interiors and does not cause as much friction as the previous models. In addition to this, it also consists of replaceable carbon brushes.
The chuck diameter starts from 1.5 mm to 13 mm. The ability to go up to 13mm allows one to attach several drill bits irrespective of the bit’s diameter.
The drill offers an impact rate of 27,000 beats per minute and 1800 revolutions per minute. The settings for the torque range from 1 to 20.
The battery is nestled conveniently at the bottom of the handle. It contains a button that, upon pressing, releases the battery.
The battery life is difficult to assess as it can differ based on the word it is performing. However, for light work, it runs for 4-5 hours.
The screwdriver’s ability is quite impressive. It can screw in a one and half inch screw.
What is Bosch GSR120-Li?
The Bosch GSR is a cordless drill with a smaller version of the GSB. This drill is excellent for small, informal jobs around the house.
It has the same modes as the GRB. It also possesses an adjustable chuck. The chuck has a diameter that ranges from 1.5 mm to 10 mm.
The drill comes with a pair of 12-voltage 1.5 Ah Lithium batteries or a pair of 2.0 Ah batteries. The battery is present in the handle as well.
Each battery takes around an hour to charge completely. The design is ergonomically sound and fits well in one’s hand.
A significant characteristic is that it contains Electrical Cell Protection, which elongates the battery life. In addition, Bosch claims that it has a better torque distribution to create cleaner holes.
It drills well into wood planks and metal but struggles with masonry. It creates very untidy holes in the cement.
The screw-driving capabilities are significantly better than most heavy drills. It can offer around 1250 revolutions per minute.
No products found.
Main Differences Between Bosch GSB and Bosch GSR
- GSB produces less heat and can run for a more extended period. This is not possible with the GSR.
- GSB is heavier than the GSR. However, the weight in the GSB is distributed well.
- GSR has a longer battery life than GSB, which is subject to change depending on the work done.
- GSR produces lower torque than GSB. Therefore, GSB is better for more demanding jobs.
- GSR is unable to drill into cement walls very well. This is not the case with the GSB drills.